Mon–Thu: 8:00 AM–4:30 PM · Fri: 8:00 AM–3:30 PM
Solutions · Service

Service, maintenance and repair.

So that your R.A.M. systems keep measuring reliably: maintenance, repair and remote support – on site at your line or remotely.

Service on site and remote
Service and training explained: commissioning, service in three stages and the three training levels.
[ 01 ]Services

What we do for you

Service, maintenance and repair of all R.A.M. systems are handled by our subsidiary, R.A.M. Kunststofftechnik GmbH – with the same team, the same expertise and at the same site in Flörsheim.

Service process in three steps Service process in three steps: 1 report and initial diagnosis – contact via support@ramgmbh.com or phone, evaluation of the defect image and CAMEN messages. 2 Remote maintenance – secure VPN or SSH access to the industrial PC, checks of CAMEN, vSTAT and camera without travel. 3 On site and annual service – annual inspection, repair with original spare parts, calibration and camera focus by R.A.M. Kunststofftechnik GmbH. 1Report & initial diagnosisContact via support@ramgmbh.comor phoneDefect image and CAMEN messagesare evaluated2Remote maintenanceSecure VPN or SSH accessto the industrial PCCheck CAMEN, vSTAT and camera –without travel3On site & annual serviceAnnual inspection, repair withoriginal spare parts, calibrationand camera focus byR.A.M. Kunststofftechnik GmbH
01

Maintenance

Annual service and inspection of your systems, so that measuring accuracy and availability stay right over time.

02

Repair

Fault diagnosis and repair in case of damage or malfunctions – at your line or with us in Flörsheim.

03

On site

Our service engineers come to you to commission, maintain and repair systems directly at the line.

04

Remote

Remote maintenance via VPN or SSH access to the inspection system – many questions can be resolved without a site visit.

05

Commissioning & camera focus

On request, an R.A.M. service engineer installs the FIS 1000; customers install the ITG systems (“Inspection to go”) themselves. Our service always focuses the line-scan cameras during commissioning.

06

Original spare parts & calibration

Original spare parts and approved consumables preserve measuring accuracy and CE conformity; plus mechanical calibration, for example on the PQMex®.

Maintenance intervals and work you can carry out yourself are described in the maintenance manual; for the PQMex®, an overview is given on the PQMex® technology and maintenance intervals →
Training for operators, production leads and maintenance staff is described under Training, operating instructions and manuals in the documentation area.

[ 02 ]Your contact

R.A.M. Kunststofftechnik GmbH

Logo of R.A.M. Kunststofftechnik GmbH
Address
Böttgerstraße 6b, 65439 Flörsheim am Main
Phone
+49 (0) 6145 9356-0
Email
info@ram-kunststofftechnik.com
Product support
support@ramgmbh.com
Service and training flyerMaintenance, repair, remote support and training on two pages – to print and pass on.
Request service

Need maintenance or repair?

Call or email us – we will agree the date and approach with you, on site or remotely.

Request a consultation →