Mon–Thu: 8:00 AM–4:30 PM · Fri: 8:00 AM–3:30 PM
Who we are

We are R.A.M.

As an owner-managed company, we have been developing and manufacturing camera-based measuring systems and software in Flörsheim am Main since 1988 for optical web inspection, quality testing in plastics recycling and data-driven process optimisation in extrusion and web production – with systems that run reliably for decades.

Founded in 1988, we have consistently focused on thorough quality inspection – companies worldwide rely on us to meet their strict quality standards. Our systems are in use in Europe, North and South America, Asia and the Middle East – from Brazil and the USA to China, India and Vietnam. R.A.M. is a member of the VDMA.

1988Founded
35+Years of experience
300+Systems worldwide
From 1988 to today: the history of R.A.M. GmbH in 80 seconds.
Transcript

In 1988, Helmut Flohr founded R.A.M. GmbH with the aim of advancing industrial quality inspection. As early as 1990, the first inspection system went into operation, and it is still running today. In 2001, the subsidiary R.A.M. Kunststofftechnik GmbH was established for consulting, sales and service. Development and production remain with R.A.M. GmbH. In 2008, the company moved to Flörsheim am Main, close to Frankfurt Airport. By 2015, more than 300 inspection systems were in use worldwide. And today, they operate across Europe, North and South America, Asia and the Middle East. Since 2019, the focus has been on the circular economy and digitalisation, first with plastPMS for production monitoring, and from 2022 with the PQM extruder, which became the PQMex® for gel measurement in recyclates. In 2025, R.A.M. GmbH helped shape DIN SPEC 91522 as initiator and co-author – an optical test method for recyclate films. The optical systems rely on the CoaXPress 2.0 and GigE Vision standards. Since 2026, the PQMex® has been sorting regranulate automatically into quality grades. R.A.M. is a member of the VDMA, and all systems carry the CE marking. Our customers should detect defects early, reduce scrap and improve their production, using measuring systems from Flörsheim am Main.

[ 01 ]Our history

35 years in motion

From our founding in 1988 to today – the milestones that made R.A.M. a globally sought-after specialist in quality inspection.

1988–2000

The beginnings of optical web inspection

1988

The beginning of R.A.M. GmbH

Under CEO Helmut Flohr, R.A.M. GmbH is founded to advance industrial quality optimisation.

1990

First inspection-system installation

The durability of our products is shown by our first inspection system, installed in 1990 – still in operation today. It proves our technological strength and builds trust with our clients.

2001–2018

Expansion, service and growth

2001

R.A.M. Kunststofftechnik GmbH

R.A.M. Kunststofftechnik GmbH is created as a subsidiary for consulting and sales. While R.A.M. GmbH handles development and manufacturing, it offers complete solutions for optical inspection, thickness measurement and recycling analysis.

2008

Relocation to Flörsheim

Our proximity to Frankfurt Airport – around 17 km or about 20 minutes by car – enables faster, more efficient global deliveries thanks to excellent transport links.

R.A.M. GmbH company building in Flörsheim am Main
The company headquarters on Böttgerstraße in Flörsheim am Main.
2015

Over 300 inspection systems worldwide

Our systems ensure the quality of a wide range of materials worldwide. The “CAMEN” software integrates with existing machines, and our modular web-inspection systems scale with your needs.

Seit 2019

Circular economy and digitalisation

2019

Introduction of plastPMS

plastPMS is a separate, optional production-monitoring system with real-time analysis and alarms – for higher quality and less waste. It runs on Windows 10 or Debian 10 and offers customisable reporting.

2021

33 years of R.A.M.

A look back on 33 years of development, partnership and innovation.

The R.A.M. GmbH team at the celebration of the company’s 33rd anniversary
The celebration of the 33rd anniversary in August 2021.
2022

The PQM Extruder

As the circular economy grows worldwide, we develop a system for precise gel measurement in recycled materials. This technology enables detailed analysis and delivers essential quality-assurance metrics.

PQM extruder setup with blown-film die, camera and haul-off
The PQM extruder during assembly: extruder, blown-film die, camera and haul-off.
2023

35 years

For 35 years we have been dedicated to improving industrial processes and quality assurance. Our journey is marked by a willingness to learn, to adapt, and to pursue excellence and sustainability. Thank you to our clients, partners and team.

2024

Celebrating our achievements in 2024

At the close of the year, our team looked back on the people, the partnerships and the progress that define our work. 2024 was a year of remarkable development – with the launch of the AI project KISS, the partnership with IMPLASTIC in Brazil and the PRSE in Amsterdam and FIP in Lyon trade fairs.

The R.A.M. GmbH team at the 2024 year-end get-together
The R.A.M. team at the year-end get-together in December 2024.
2025
Milestone · September 2025

CoaXPress 2.0 and GigE Vision

Our optical systems rely on two established standards in industrial machine vision: CoaXPress 2.0 for very fast real-time inspection and GigE Vision for flexible, wide-area multi-camera networks – both integrated uniformly via GenICam.

  • CoaXPress 2.0: up to 12.5 Gbit/s per cable, over 50 Gbit/s bundled
  • GigE Vision: 1–10 Gbit/s, cable lengths up to 100 m
  • GenICam: vendor-independent camera control
2026
Milestone · May 2026

Quality sorting with the PQMex®

The PQMex® measures every batch of regranulate while the buffer is being filled, stores quality and quantity and automatically assigns the material a quality grade – premium (A), standard (B) or mixed to customised quality (C). Even waste is put to use through rework or mixing.

  • Real-time measurement, buffer time approx. 10 minutes
  • Automatic decision: saleable or waste
  • Quality grades A, B and C to customer specification
[ 02 ]Quality and standards

What you can rely on

Membership

Member of the VDMA

German Mechanical Engineering Industry Association.

Standardisation

DIN SPEC 91522

Initiator and co-author of the optical test method for recyclate films.

Durability

In operation since 1990

Our first inspection system from 1990 is still in operation today.

Safety and technology

CE and industry standards

All systems CE-marked; cameras to CoaXPress 2.0 and GigE Vision.

[ 03 ]What drives us

Mission, vision & values

Mission

Optimising processes

We provide measuring systems for web inspection, recyclate testing and process optimisation that help our clients detect defects early, reduce scrap and improve their production processes in a targeted way.

Vision

Setting standards

We aim to lead in industrial quality-measurement technology, shape the future of plastics and recycling, and set standards for quality and performance.

01

Innovation

We advance technology to enhance our clients' quality and efficiency.

02

Collaboration

We work closely with clients, partners and our team to achieve goals.

03

Customer focus

We focus on our clients' specific needs with excellent service and consultancy.

04

Results & impact

We deliver significant results for clients, stakeholders and society.

Career

Become part of R.A.M.

We grow with every challenge. Alongside our advertised positions, we always welcome speculative applications from people passionate about quality and technology.

Send a speculative application→
1 open position: electronics technician (m/f/d) for assembly and commissioning →
Our team of experts is ready to help

Let’s discuss your needs

Whether surface inspection, recycling quality or a custom challenge – we’ll find the right solution together.

Request a consultation → Send in a sample for analysis