Mon–Thu: 8:00 AM–4:30 PM · Fri: 8:00 AM–3:30 PM
Project · standardisation

DIN SPEC 91522

Test method for the defect density of recycled films

R.A.M. is an initiator and co-author of DIN SPEC 91522 (November 2025) – a specification for an optical test method to determine the defect density of films made from recycled plastics.

StandardisationDIN-ConnectRecyclingOptical inspection
DIN SPEC – Heute Idee. Morgen Standard.
[ 01 ]Overview

What it is about

DIN SPEC 91522 describes how the defect density of films made from recycled plastics can be determined objectively and comparably using optical measuring systems. It thus establishes a uniform quality benchmark for a field that previously had no standardised method – an important basis for greater quality and confidence in recycled plastic films.

While standards such as DIN SPEC 91446 describe general data quality levels for characterising recyclates, DIN SPEC 91522 specifically defines the optical test method used to objectively measure defect density on a test film.

Principle of DIN SPEC 91522 A film made from recyclate is measured optically – objectively and reproducibly instead of by visual judgement. The result is the defect density as a key value. Supplier and buyer thus talk about the same, comparable values. SAMPLETEST METHODKEY VALUEBENEFITfilm made from recyclateoptical measurementobjective · reproducibleDefect densitykey value of film qualityinstead of visual judgementSupplierBuyerthe same, comparable values
DIN SPEC 91522 explained: test method, principle and distinction from DIN SPEC 91446.
[ 02 ]Our role

R.A.M. as initiator & co-author

R.A.M. helped shape the specification as an initiator and author – represented by Christopher Voigtmann and Helmut Flohr. Our many years of experience in automated surface inspection – for instance with line and area cameras, contrast thresholds and defect classification – fed directly into the method.

Matching technology: FIS 1000→
[ 03 ]Consortium

Developed together

DIN SPEC 91522 was developed in the DIN-SPEC consortium according to the PAS procedure, funded via DIN-Connect, a funding programme of DIN and DKE. The participants were:

R.A.M. GmbH Institut für Polymer- und Produktionstechnologien RKW SE Lowapol HydroDyn Recycling Krauss Consulting & Recycling Bischof+Klein Renolit
[ 04 ]Key facts

The standard at a glance

NumberDIN SPEC 91522
TitleTest method for determining the defect density of films made from recycled plastics
EditionNovember 2025
ICS83.140.10
Extent36 pages
LanguagesGerman / English
ProcedurePAS · DIN-Connect
Available fromDIN Media
DIN SPEC 91522 flyerDIN SPEC 91522 and our role on two pages – to print and pass on.
Standard-compliant quality control

Questions about DIN SPEC 91522?

Would you like to determine the defect density of your films in line with the standard? We will show you how our systems implement the method.

Request a consultation →