Mon–Thu: 8:00 AM–4:30 PM · Fri: 8:00 AM–3:30 PM
Surface inspection · FIS 1000

FIS 1000Inline web inspection for films and web materials

FIS · Film Inspection System
Precise inline inspection of running webs

The FIS 1000 is a web inspection system. It detects gels, black specks, holes, insects, oil marks and many other contaminants in real time – so that defective sections are detected early. The series comprises four variants on the same platform: Surface Camera, Tandem, Biaxial and Economy.

FilmBiaxial filmNonwovensTextiles
FIS 1000 – beam with two inspection cameras// Web · scan · classification
FIS 1000 Four variants · inline
[ 01 ]Overview

Precision in web inspection

The FIS 1000 inspects the surface of running webs – film, biaxially oriented film, nonwovens and textiles. Typical applications are blown film extrusion and cast film extrusion – with seamless inspection of every metre across the full web width, in a tandem set-up also for two webs at the same time.

FIS 1000 explained: camera and lighting, the four versions and evaluation.
[ 02 ]Variants

One platform, four configurations

All variants use the same technology, the same detection performance and the same software – they differ in camera count, design and equipment.

Core variant

FIS 1000 – Surface Camera

The core variant of the series for real-time detection of surface defects on running webs.

  • One camera per inspection point
  • For film, nonwovens and textiles
Two webs

FIS 1000 – Tandem

In a tandem set-up, one system inspects two webs at the same time – one camera per web. CAMEN displays both webs side by side.

  • Two webs, one camera each – in one system
  • Both webs displayed side by side in CAMEN
  • A separate defect map for web 1 and web 2
Biax lines

FIS 1000 – Biaxial

Biaxial films place special demands on inspection – the FIS 1000 – Biaxial is built precisely for this.

  • Can be used in both the machine-direction (MDO) and transverse-direction (TDO) stretching sections of the line
  • Monitors the stretching process on the running biax line
  • Tuned to BOPP and BOPET (biaxially oriented polypropylene and polyester) and other biax films
Economical

FIS 1000 – Economy

Reduced to the essentials – without compromising detection performance.

  • Control cabinet with fan system instead of air conditioning or water cooling; outputs not decoupled
  • The affordable entry into the FIS 1000 series
  • The same reliable defect detection as the Surface Camera
The FIS 1000 configurations, top view Top view, the web runs from bottom to top. Surface Camera and Economy: one camera covers the full web width; Economy with ventilation instead of air conditioning or water cooling. Tandem: two webs side by side, one camera per web. Biaxial: one camera each in the machine-direction (MDO) stretching section and after transverse-direction (TDO) stretching, where the web is wider. Surface Camera · Economyone camera per inspection pointweb directionEconomy: ventilation instead of air conditioning or water coolingTandemtwo webs, one camera eachweb 1web 2Biaxialmachine- (MDO) and transverse-direction (TDO) stretchingMDOTDO
[ 03 ]Applications

One platform for three worlds

Film

Reliable inline inspection of running film webs – defects are detected and documented in real time.

Biaxial film

Tailored to the production of biaxially oriented films – monitoring the stretching process (e.g. BOPP, BOPET).

Nonwoven & textiles

From fibre distribution to texture consistency – every textile meets the desired specifications.

[ 04 ]Defect detection

Detected in real time

The FIS 1000 detects a broad spectrum of surface defects directly on the running web – reliably and reproducibly.

Gels

Gel inclusions in the material.

Black specks

Dark spots and burnt particles.

Holes

Holes and breakthroughs in the web.

Insects

Trapped insects and flies.

Oil marks

Oil marks and smears on the surface.

Contaminants

Foreign particles and other contaminants.

Burn marks

Burnt and discoloured spots from the extrusion process.

Fisheyes

Small, lens-shaped inclusions in the film.

Drips, thin spots, wrinkles

Typical defects in nonwovens – polymer drips, thin spots and wrinkles.

[ 05 ]System & integration

More than a camera

The FIS 1000 is a complete inspection system: it integrates into your line, keeps every defect traceable and shares its data openly.

Adaptive LED lighting

Programmable adaptive LED long-field lights – for transmitted, reflected, bright-field or dark-field illumination. Lighting is matched to material and defect type.

Process synchronisation

Coupling to the production line via digital inputs and outputs: automatic recipe pre-selection, roll-change and encoder signals, inspection stand-by, plus control of alarm lamp and line stop.

Classifier teach-in

The operator classifies defects from real defect images; the classifier then sets the inspection parameters. Any number of size and type classes can be defined.

Defect map

Continuous wallpaper view of all defects – symbolic, as an image and as a grey-scale crop. Every defect stays traceable across the whole web.

Open data format

Log data as CSV files, via TCP/IP or in customer-specific formats – open for integration with higher-level systems.

Current camera technology

FIS systems use line cameras based on CoaXPress 2.0 in 4K, 8K or 16K; the Economy version also with GigE Vision, depending on the configuration.

More on CoaXPress 2.0 and GigE Vision →

FIS 1000 process synchronisation with the production line Via digital inputs, the FIS 1000 receives recipe preselection, the roll change and rotary encoder signals and inspection stand-by from the line. Via digital outputs, it controls the alarm lamp and the line stop. Production lineline control (PLC)FIS 1000industrial PC with CAMENDIGITAL INPUTSRecipe preselectionRoll changeRotary encoderInspection stand-byDIGITAL OUTPUTSAlarm lampLine stop

RelatedService, maintenance and remote support · Training for operators, production leads and maintenance

[ 06 ]Technical data

Specifications

Typical defect images

Gel / fish-eye
Gel / fish-eye
Scratch
Scratch
Particles / specks
Particles / specks
Hole
Hole
Fly / insect
Fly / insect
Fibre / hair
Fibre / hair

Lighting modes and all defect images →

Optics
Camera
Line camera based on CoaXPress 2.0 · 4K, 8K or 16K; Economy: CoaXPress 2.0 or GigE Vision depending on the version
LED length
Customer-specific – matched to the web width
Illuminance
up to 500 000 lx
Industrial PC & software
Memory (RAM)
16 GB
SSD
1 TB
CAMEN
Version 12
vSTAT / PAT
Version 1 – either vSTAT (internal SQL database) or PAT (file-based)
Control cabinet
Climate control
Air conditioning or water cooling; Economy: fan system
Outputs
Decoupled; Economy: not decoupled
Communication & operation
Network
RJ45 Ethernet port (industrial network, separate segment recommended)
Data storage
Either stored locally in an internal SQL database with reports via vSTAT or file-based with reports via PAT
Operation
Touchscreen with on-screen keyboard; mouse and keyboard included
Installation
On request by an R.A.M. service technician
Process
Versions
Surface Camera · Tandem · Biaxial · Economy
Max. web width
10.50 m
Max. web speed
depends on the line rate of the camera
Environment & installation site
Operating temperature
0–45 °C
Humidity
5–95% (non-condensing)
Site requirements
Flat, load-bearing, clean and dry; indoor installation only
Electrical supply
Voltage & frequency
230 V · 50 Hz · 1~
Power consumption
order-specific
Connection type
IDC (insulation displacement connector)

Subject to technical changes. Details of your configuration are available on request.

[ 07 ]FAQ

Frequently asked questions about the FIS 1000

Your question isn’t here? Just reach out.

The FIS 1000 (Film Inspection System) inspects moving webs inline directly in the production line – including blown film, cast film, biaxially oriented film, nonwovens, paper, coatings as well as aluminium and steel sheet. Depending on the material, included LED lighting in bright field (transmitted light), dark field or reflected light is used, with the lighting length custom-matched to the web width.

The FIS 1000 is available in four variants built on a shared platform: “Surface Camera” monitors the web width with a single camera, while “Tandem” inspects two webs at the same time – one camera per web, displayed side by side in CAMEN. The “Biaxial” variant places cameras in the MDO and TDO sections of biaxially oriented film lines, and “Economy” provides the same inspection setup as Surface Camera using fan cooling instead of an air conditioner or water cooling and, depending on the version, a GigE Vision interface.

Synchronisation with the line is handled via digital inputs and outputs – for example for rotary encoders, roll change, recipe selection, inspection standby as well as alarm lamp and line stop. Upon request, R.A.M. service carries out the mechanical installation on site; alignment and focusing of the line scan cameras is always performed by R.A.M. service personnel during commissioning.

Real-time inspection and defect classification are always handled by the CAMEN software on the supplied industrial PC. For subsequent evaluation of roll reports and defect maps on the FIS 1000, users can choose between vSTAT (local storage in an internal SQL database for cross-roll statistics) and the file-based Post Analysis Tool (PAT).

Our team of experts is ready to help

Interested in the FIS 1000?

We will show you how the FIS 1000 can advance your surface inspection and production.

Request a consultation →