Mon–Thu: 8:00 AM–4:30 PM · Fri: 8:00 AM–3:30 PM
Surface inspection · Low Cost

ITG 850 – LCCompact inline surface inspection

ITG · Inspection to go
The low-cost entry into automated surface inspection

The ITG 850 – LC is the affordable entry into automated surface inspection: reliable, real-time defect detection at an attractive price – ideal for getting started or for cost-sensitive lines.

Low CostEntry-levelReal-timeSurface inspection
ITG 850 – LC: rail with two inspection cameras // ITG 850 · LC
[ 01 ]Overview

Automated inspection at an entry-level price

The ITG 850 – LC brings automated surface inspection at an attractive price: it detects defects reliably in real time and is particularly suited to getting started or to cost-sensitive production lines. Within the portfolio, it sits between the ITG 500 – Gel Analyser and the FIS 1000 – Economy.

[ 02 ]Advantages

Reduced to the essentials

Attractive price

Reliable defect detection at an attractive price – the affordable entry into automated surface inspection.

Ideal for getting started

Ideal for getting started with automated inspection or for cost-sensitive lines.

Real-time detection

Reliably detects surface defects directly in the running process.

The full technical data is in the datasheet – freely available in English, German, French and Polish under Downloads.

[ 03 ]Positioning

Where the ITG 850 – LC fits

The ITG 850 – LC sits between the ITG 500 – Gel Analyser and the FIS 1000 – Economy – as the affordable entry into automated surface inspection.

Test & lab extruders

ITG 500 – Gel Analyser

Online analysis of gels and defects on test and laboratory extruders.

Low-cost entry

ITG 850 – LC

The affordable automated surface inspection in real time.

You are here
Production

FIS 1000 – Economy

Cost-effective inline web inspection on running webs.

RelatedService, maintenance and remote support · Training for operators, production leads and maintenance

[ 04 ]Technical data

Specifications

Typical defect images

Gel / fish-eye
Gel / fish-eye
Scratch
Scratch
Particles / specks
Particles / specks
Hole
Hole
Fly / insect
Fly / insect
Fibre / hair
Fibre / hair

Lighting modes and all defect images →

Optics
Camera
Line camera based on GigE Vision · 4K, alternatively 2K, 6K, 8K or 12K
LED length
Customer-specific – matched to the web width
Illuminance
up to 500 000 lx
Industrial PC & software
Memory (RAM)
16 GB
SSD
1 TB
CAMEN
Version 12
vSTAT / PAT
Version 1 – either vSTAT (internal SQL database) or PAT (file-based)
Communication & operation
Network
RJ45 Ethernet port (industrial network, separate segment recommended)
Data storage
Either stored locally in an internal SQL database with reports via vSTAT or file-based with reports via PAT
Operation
Touchscreen with on-screen keyboard; mouse and keyboard can be connected
Installation
By the customer – “Inspection to go”
Process
Max. web width
order-specific
Max. web speed
order-specific
Environment & installation site
Operating temperature
0–45 °C
Humidity
5–95% (non-condensing)
Site requirements
Flat, load-bearing, clean and dry; indoor installation only
Electrical supply
Voltage & frequency
230 V · 50 Hz · 1~
Power consumption
order-specific
Connection type
IDC (insulation displacement connector)

Subject to technical changes. Details of your configuration are available on request.

[ 05 ]FAQ

Frequently asked questions about the ITG 850 – LC

Your question isn’t here? Just reach out.

The ITG 850 – LC (“Inspection to go – Low Cost”) is the compact entry-level system for automatic inline surface inspection of running webs such as film, nonwovens, paper, coatings and sheet metal. It detects and classifies gels, black specks, holes and contamination in real time; the matching LED lighting is always included and custom-sized to the web width.

While the FIS 1000 is designed as a modular platform for wide webs, very high line speeds as well as tandem and biaxial lines, the ITG 850 – LC focuses on a compact setup for standard web widths. Mechanical installation and wiring are carried out by the customer following the operating instructions; precise camera alignment and focusing are performed by R.A.M. service personnel during commissioning.

The system runs the CAMEN inspection software on the supplied industrial PC for recipe management, real-time defect detection and roll reporting. For evaluation and local data storage, users can choose between vSTAT (with an internal SQL database) and the file-based Post Analysis Tool (PAT).

Our team of experts is ready to help

Interested in the ITG 850 – LC?

We will show you how the ITG 850 – LC delivers reliable surface inspection at an attractive entry-level price.

Request a consultation →