PQMex®Online quality measurement for regranulate
Real-time quality control: continuous online monitoring detects quality deviations early, reducing scrap and costs.
// PQMex®
Real-time quality control. Less scrap.
The PQMex® (Parallel Quality Measurement Extruder) is an online quality measurement system for recycling production lines. It combines sampling, extrusion of a test film, optical inspection and evaluation in one automated system – for continuous insights into material quality. Optical inspection is handled by a built-in ITG 500 (Inspection to go), while PQMex® remains a standalone system.
The online comparison of two production lines and the rapid root-cause analysis of process deviations lead to optimised processes and a faster ROI.
// PQMex® in productionWhat PQMex® delivers for you
Reduce waste
Early detection and classification of defects.
Increase efficiency
Automated operation with minimal downtime.
Ensure quality
Continuous real-time monitoring of gels and defects.
Gain transparency
Full data traceability and process insights.
Optimise processes
Immediate feedback for faster decision-making.
Virtual homogenisation
Based on the weighted quality values, batches can be blended in a targeted way, quality fluctuations balanced out and rejects reduced. In compounding, the system also significantly shortens testing times when changing formulations.
Technology in detail
Fully automated operation
Recipe-based control for fast material changeovers.
High-precision defect detection
Detection and classification of defects by size and type.
Real-time quality analysis
Online measurement and classification of gels and defects.
Stable bubble diameter
Monitoring of a consistent bubble diameter.
Sorting & homogenisation
Quality-based sorting and homogenization of the material.
SQL database
Full traceability and advanced analytics.
Seamless integration
Compact design for easy retrofit into existing lines.
Where PQMex® is used
Plastic recycling lines
Film extrusion processes
Quality control in pelletising
All PE types – LDPE, MDPE, LLDPE and HDPE (low-, medium-, linear low- and high-density polyethylene) – can be tested, in every pellet colour from natural, black and white to multi-colour. The PQMex® assesses how soft and hard contamination, gels, additives and blend ratios affect the film, and grades the material accordingly. Typical materials are post-consumer and post-industrial recyclates (PCR, PIR) as well as material from compounding; the assessment is based on automatic gel counting and speck measurement on the test film.
Already have an extruder or a blown-film test line? The ITG 500 – Gel Analyser brings the same inspection technology directly to your line – retrofitted instead of as a standalone system. To the ITG 500 – Gel Analyser →
From granules to grade
PQMex® measures online while a buffer is being filled; a buffer retention time of approx. 10 minutes compensates for the analysis delay. The tested regranulate enters the weighing hopper, quality and quantity are stored – and the material is classified into quality grades.
The measurement interval is freely adjustable, for example every two minutes: the PQMex® then takes a sample from the granule stream – automatically via Venturi nozzles if required – and extrudes it into a blown film. By controlling the bubble diameter, the film thickness stays within the tolerances of DIN SPEC 91522. Based on the required measurement area, for example per m² or per 100 cm², the system outputs a quality value: the weighted number of gels per size class.
Swipe the diagram sideways →
Premium quality
High-grade regranulate for demanding applications.
Standard quality
Saleable regranulate in standard quality.
Customised
Mixed regranulate to individual specification.
The quality grade to your specification
You decide which quality grade a material achieves: a limit in gels per m² is stored for each size class – per customer or application. The same measurement can therefore mean quality A for one buyer and quality B for another. Instead of per m², the limits can also refer to another area, such as per cm².
| 0–0.05 | 0.05–0.1 | 0.1–0.3 | 0.3–0.5 | 0.5–1.0 | > 1.0 | |
|---|---|---|---|---|---|---|
| Customer X – limit | 3500 | 500 | 200 | 100 | 100 | 0 |
| Customer Y – limit | 4000 | 700 | 300 | 250 | 115 | 2 |
| Measurement LLDPE | 3780 | 142 | 40 | 3 | 1 | 0 |
In the example, the measurement in the 0–0.05 mm² class is above the limit of customer X but below that of customer Y: for customer X the material is quality B, for customer Y quality A.
Integrated software
CAMEN
Streamlines production with advanced quality analytics and a defect map.
vSTAT
Enhance production with visual statistics and multi-sensor integration.
In use at recyclers
Two examples from our news: where the PQMex® originated and how a recycler uses it in the laboratory today.
Morssinkhof – Rymoplast
Morssinkhof – Rymoplast recycles flexible plastics such as LDPE film. The first extruder to be equipped with our ITG 500 – Gel Analyser was installed there – and that is where the idea for the PQMex® began.
De Paauw Sustainable Resources
The Dutch recycler, in which LyondellBasell holds a stake, has extended its laboratory with a PQMex® to analyse the quality of its recyclates – with a production of 800,000 kg of regranulate every week.
The PQMex® on video
Short insights into gel and contamination analysis with the PQMex®. German subtitles can be switched on in the player.
RelatedService, maintenance and remote support · Training for operators, production leads and maintenance
Frequently asked questions about the PQMex®
Your question isn’t here? Just reach out.
The PQMex® (Parallel Quality Measurement Extruder) processes polyethylene grades (LDPE, LLDPE, MDPE and HDPE) in the form of regranulate – flakes after consultation – into a test film. Typical applications include post-consumer and post-industrial recyclates (PCR, PIR) as well as compounded materials. The system is not designed for polypropylene (PP), PET or finished film webs; for PET/rPET, the PQMex® – Cast concept is currently in planning.
In production, the PQMex® measures online in a bypass – in the laboratory, it can also be used offline for individual samples. At freely adjustable intervals (e.g. every two minutes), pellets are optionally diverted automatically via Venturi nozzles and extruded into a blown film whose thickness is kept within the tolerances of DIN SPEC 91522 by controlling the bubble diameter. A line scan camera detects gels, black specks and holes in transmitted light and outputs the weighted gel count per size class (e.g. per m² or per 100 cm²).
Based on the continuously determined quality value, the system assigns the regranulate to defined quality grades (e.g. A, B, C) and can optionally control silo selection directly. In addition, the continuous measurement series enable virtual homogenisation: different batches can be blended selectively to compensate for quality fluctuations and verify specifications for customers.
Every PQMex® is supplied with the CAMEN inspection software and the vSTAT (Visualization and Statistical Analysis Tool) evaluation software on an R.A.M. industrial PC. All measurement data, defect images and classifier statistics are stored locally in an internal SQL database on the system and are available for roll and batch reports as well as data export.
Interested in PQMex®?
Talk to us about your recycling line – we will show you how PQMex® can be integrated.