ITG 500 – Gel AnalyserOnline gel inspection on test and laboratory extruders
The ITG 500 Gel Analyser brings gel inspection directly to your test or laboratory extruder. A camera, LED illumination, an industrial PC and a compact control cabinet are fitted to an existing test or laboratory extruder – the same technology as in the PQMex®, retrofitted instead of turnkey.
// ITG 500 · Gel Analyser
Online gel inspection on your test or laboratory extruder
The ITG 500 Gel Analyser detects, classifies and logs gels and optical defects in films and webs – bright field for opaque and transparent films, dark field for highly transparent films. Rather than being supplied as a standalone system, the system is fitted to a test or laboratory extruder already in place, including third-party machines.
Four components to fit on
The system consists of a few building blocks that are fitted to the extruder together.
Line-scan camera
Captures the running web line by line – high-resolution, for bright and dark field.
LED illumination
Longfield LED matched to the material – transmitted light for opaque and transparent films, reflected light for coated films.
Industrial PC
Runs CAMEN, evaluates the defects online and writes the roll reports.
Control cabinet
Kept compact – houses the control and ties in the line’s digital inputs and outputs.
Four illumination modes
Dark-field aperture
Specifically designed to detect gel specks in transparent films.
Transmitted light
Ideal for both transparent and opaque films.
Reflected light
Enhances visibility and clarity, especially for coated films.
Dual illumination
Transmitted and reflected light combined.
Automatically detected and classified
From gel specks, gels and burners through fisheyes to impurities, wrinkles, voids or flies – the system classifies them all and additionally provides photos of each defect for detailed evaluation.
Gel specks
Tiny gel points in transparent films.
Gels
Gel inclusions in the material.
Burn marks
Burnt particles and dark spots.
Fisheyes
Lens-shaped defects.
Impurities
Foreign particles and inclusions.
Wrinkles
Wrinkles and creases in the film.
Voids
Holes and voids.
Flies
Small fly-like specks.
From recipe to analysis
The ITG 500 is operated through CAMEN on the touchscreen. Classifiers, warning and alarm limits and the defect map work just as they do on the other R.A.M. inspection systems.
Log in
After start-up the system is locked. User name and password unlock the levels up to maintenance.
Load recipe
All product-related settings sit in the recipe; loading it sets the camera automatically.
Calibrate
Zero the opacity with no material, then calibrate the camera to the material under test.
Inspect
The running web is inspected; defects are classified immediately and placed on the defect map.
Analyse
Roll reports are exported as CSV or over TCP/IP; vSTAT handles the in-depth analysis.
Connection to your network
Network integration
Fits into your IT network – accessible from any workstation.
Real-time evaluation
Monitor evaluations in real time.
USB data export
Download data directly via the USB interface.
Specifications
Subject to technical changes. Details of your configuration are available on request.
RelatedService, maintenance and remote support · Training for operators, production leads and maintenance
Frequently asked questions about the ITG 500 – Gel Analyser
Your question isn’t here? Just reach out.
The ITG 500 – Gel Analyser is designed as an online retrofit system for existing test and laboratory extruders as well as blown film pilot lines. It brings the same optical gel and defect detection as the PQMex® to an existing test line without requiring a dedicated measuring extruder.
The package comprises four matched components: the line scan camera, the LED lighting unit sized to the film width (for bright field or dark field), the industrial PC with pre-installed software and a compact control cabinet for digital I/O. As an “Inspection to go” system, the customer mounts the assemblies onto the laboratory extruder; R.A.M. sets the camera focus during commissioning.
The CAMEN inspection software detects gels, black specks and holes in real time and assigns them to defined defect classes by size, shape and contrast. All measurement series, defect images and roll reports are stored locally in the internal SQL database of vSTAT on the industrial PC and can be exported as PDF or CSV files.
Interested in the ITG 500 – Gel Analyser?
We will show you how the ITG 500 improves your gel and defect analysis in the lab.