Mon–Thu: 8:00 AM–4:30 PM · Fri: 8:00 AM–3:30 PM
Roll hardness · inline

ACA RoQ Inline

Inline Roll Quality Analyzer

A fully automated roll hardness analyser for direct integration into the production line – measuring every roll after the winder and before packaging, entirely without manual intervention. Real-time quality monitoring reveals winding issues early, ensures more consistent rolls and fewer customer claims; integration into existing lines is easy.

Manufactured by ACA Systems; sales, commissioning, calibration, maintenance and spare parts: R.A.M. GmbH
ACA RoQ Inline – fully automated roll hardness measurement on the line // ACA RoQ Inline
[ 01 ]At a glance

Why the ACA RoQ Inline

During winding, thousands of layers are placed on top of each other. Even the smallest differences in the cross-direction profile add up to clear hardness variations at the roll surface – hardness measurement makes these profile defects visible.

Every roll measured

Fully automated system that measures all rolls on the conveyor non-destructively – no operator and no need for anyone to stand by.

Early defect detection

Detects deviations such as soft edges or hardness variations before they cause runnability issues or claims.

Consistently high quality

Reliable real-time measurement enables fine-tuning of the winding process for a uniform roll structure.

Ready for smart manufacturing

Automated data handling and communication with the mill system – compatible with digital production systems.

Better profile control

The hardness profiles support control of the cross-direction profile, especially caliper – for better runnability and fewer winding problems.

Better incoming quality

Converters receive more uniform rolls – increasing efficiency along the entire value chain through to printing and end use.

// Applications & industries
Paper & containerboard Specialty & graphic papers Plastic films (PE/PP/PVC/PET) Oriented films (BOPP/BOPE/BOPA) Flexible packaging & labels Converting industry Technical & special films
Why measure roll hardness? Measuring principle, ACA RoQ Handheld and ACA RoQ Inline explained.
[ 02 ]Workflow

Fully automated inline

01

Roll arrives

The wound roll reaches the measuring station on the conveyor.

02

RollBeam positions

The ACA RollBeam manipulator automatically moves the A20 measuring head to the roll.

03

Measure profile

The A20 measuring head captures the hardness profile – always the same procedure, without operator-related variation.

04

Data & handoff

Automated data handoff to the mill system; the roll continues without intervention.

System: The ACA RoQ Inline consists of the ACA RoQ A20 measuring head and the ACA RollBeam manipulator (type RB800-685) – designed for unsupervised continuous operation.
[ 03 ]Technical data

Specifications

System: ACA RoQ A20 measuring head + ACA RollBeam manipulator (type RB800-685).
// Mechanical
Width
900 mm
Depth
550 mm (chassis) · 735 mm with gear rack
Height
480 mm
Weight
25 kg
// Operation
Max. conveyor speed
300 mm/s
Min. space between rolls
1500 mm (unattended)
Min. roll width
400 mm
Roll diameter
300–1600 mm (design 800 mm)
Home → roll / roll → home
2 s / 1,5 s
Return after reset
30 s
// Electrical
Power input
AC 100–240 V, 1.6–0.7 A, 50–60 Hz · DC 110–150 V, 1.4 A
Fuses
2 × 3,15 AT (5×20 mm)
Internal supply
24 V DC, 0 V to chassis ground
Digital inputs
24 V, ground-referenced · “0”: −3…5 V · “1”: 11…30 V · 3 mA
Power supply output
24 V DC, max. 100 mA
Emergency stop and interlock loop
potential-free contacts for ≥ 24 V DC only
Relay outputs
potential-free, isolation 500 V, 127 Vac / 30 Vdc
[ 04 ]Software

A seamless data chain

Capture

Automatic measurement

Every roll is captured automatically – no operator, always the same procedure.

Integration

Plant control system

Automated data handling and communication with the plant control system.

Evaluation

Claims handling

The hardness profile of every roll is available for handling customer claims.

[ 05 ]Service & maintenance

Reliable in the long run

R.A.M. supports the ACA RoQ Inline throughout its operation – from installation and configuration to maintenance and modernisation.

Service

Maintenance & spare parts

Annual maintenance and reliable spare-parts supply.

Service

Data services

Integration, analysis and personalisation of your data.

Service

Installation & integration

Professional installation and integration into your production line by R.A.M.

[ 06 ]FAQ

Frequently asked questions about the ACA RoQ Inline

Your question isn’t here? Just reach out.

The ACA RoQ Inline combines the A20 measuring head with the ACA RollBeam manipulator (type RB800-685) directly on the conveyor behind the winder or slitter. As soon as a roll enters the measuring position, the manipulator scans the hardness profile across the roll width non-destructively and without operator intervention, transferring the data to the plant control system.

The system is connected to the line via 24 V digital inputs, clock outputs and potential-free relay outputs for sequence control; measurement data is transferred automatically to the mill system. For the safety concept of the conveyor line, the system provides an emergency stop and interlock loop that is connected exclusively to potential-free contacts (≥ 24 V DC).

The system is manufactured by ACA Systems; R.A.M. GmbH handles sales, project engineering, commissioning, calibration, routine maintenance and spare parts supply. For mobile spot checks at other winders or in the warehouse, the inline unit can be complemented by the portable ACA RoQ Handheld.

Our team of experts is ready to help

Interested in the ACA RoQ Inline?

We are happy to advise you – from application to commissioning and training.

Request a consultation →